PILLAR

Life & Family

From life with a 3D printer to family events and everyday know-how. A collection of personal, lived-in stories.

20 articles total
All Saving with RakutenHousehold Finance & AssetsAI & Work SkillsLife & Family
3D Printing & DIY 6 Family Life 14
Pricing Unopened Filament on Mercari: List at 1,700 Yen, Keep 780 Yen 3D Printing & DIY

Pricing Unopened Filament on Mercari: List at 1,700 Yen, Keep 780 Yen

My plan for selling ABS 3D printer filament I bought by mistake on Mercari for 1,700 yen. After the 10% selling fee and 750 yen size-60 shipping, I keep about 780 yen. Here is the math, plus the plan to drop to 1,500 yen after 2 weeks and move it to Jmoty if it still does not sell.

2026.10.13 · 12 min read
Visiting Free Corporate Museums with Kids: Closed Days, Reservations, and Parking Compared for 5 Museums Family Life

Visiting Free Corporate Museums with Kids: Closed Days, Reservations, and Parking Compared for 5 Museums

Before taking the kids to a free corporate museum, I compared closed days, reservations, and parking across five museums. The Kuroneko Yamato Museum has free admission, needs no reservation for fewer than 10 people, and has no parking. In October 2026 it has 3 temporary closure days. I also put together the steps to check right before you go.

2026.10.04 · 13 min read
Can you use gakudo (after-school care) during childcare leave in Japan? How to check when your municipality's guide and a national notice disagree Family Life

Can you use gakudo (after-school care) during childcare leave in Japan? How to check when your municipality's guide and a national notice disagree

After reading only my municipality's after-school club application guide, I wrote that families on childcare leave were not eligible, then corrected it based on a Children and Families Agency notice. Here I cover the gap between the national position and municipal practice, how to cross-check primary sources, what to ask your municipality, and how it differs from continuing daycare during leave.

2026.09.29 · 11 min read
Paid Your Newborn's Hospital Bill Up Front? How to Get It Back in Two Steps: Ryoyohi and the Child Medical Subsidy Family Life

Paid Your Newborn's Hospital Bill Up Front? How to Get It Back in Two Steps: Ryoyohi and the Child Medical Subsidy

Right after our fourth child was born, the baby was admitted to the neonatal unit, and since the insurance card wasn't ready yet, we paid the full medical bill ourselves. Here's the order for getting it back in two steps (ryoyohi from health insurance, then reimbursement from the local child medical subsidy), how this differs from the lump-sum childbirth allowance, how to read extra benefits on the notice, and the receipt-copy trap.

2026.09.27 · 16 min read
We Chose Our Newborn Stroller Based on Whether It Fits in the Car Trunk Family Life

We Chose Our Newborn Stroller Based on Whether It Fits in the Car Trunk

We were looking for a stroller for our newborn. At first we were leaning toward a model from Brand A, but once trunk-loading ease became our deciding factor, our pick changed.

2026.09.07 · 3 min read
Planning Omiyamairi, Shichi-Go-San and Family Photos All in One Day Family Life

Planning Omiyamairi, Shichi-Go-San and Family Photos All in One Day

With four kids, days when the whole family is free are rare. Here is the plan I put together to fit a newborn shrine visit, Shichi-Go-San and a family photo shoot into the same day, plus what I checked about timing, shrine offerings, outfits and bookings.

2026.09.06 · 14 min read
We Considered a Catalog Gift for Our Birth Thank-You Gifts, but Passed on It Family Life

We Considered a Catalog Gift for Our Birth Thank-You Gifts, but Passed on It

When choosing thank-you gifts for people who gave us baby gifts, a catalog gift was on the shortlist. We ended up not going with it, so here's how we made that call.

2026.09.03 · 2 min read
What Having a Fourth Child Taught Me About Japan's Childbirth and Childcare Benefits Family Life

What Having a Fourth Child Taught Me About Japan's Childbirth and Childcare Benefits

Our fourth child was just born. Here's what I found out about the lump-sum childbirth allowance, how the 'third child and beyond' count works for the child allowance, and Tokyo's Baby First program.

2026.09.01 · 3 min read
When My Daughter Starts Worrying About Unwanted Hair, I Looked Into Kai's 'Nadesori' Family Life

When My Daughter Starts Worrying About Unwanted Hair, I Looked Into Kai's 'Nadesori'

Kai's new-concept razor 'Nadesori' has been getting a lot of buzz. Since my daughter will eventually reach that age, I looked into how it works, along with reviews and things to watch out for before buying one.

2026.08.24 · 4 min read
I Pre-Ordered the お買いものパンダ Hobonichi Whiteboard Calendar 2027 for Next Year Family Life

I Pre-Ordered the お買いものパンダ Hobonichi Whiteboard Calendar 2027 for Next Year

I pre-ordered the Rakuten-exclusive お買いものパンダ edition of the Hobonichi Whiteboard Calendar 2027. Along with a look at the discounted 2026 version you can start using right now, here's a rundown of this write-and-erase, full-surface whiteboard calendar.

2026.08.07 · 4 min read
How AI Helped Me Get Four Kids Through Their Summer Jiyu Kenkyu Projects Family Life

How AI Helped Me Get Four Kids Through Their Summer Jiyu Kenkyu Projects

Every summer, finding jiyu kenkyu topics for all four of my kids has been a struggle. Here's my hands-on experience trying Gakken Kids Net's new AI service, plus a few things I learned to watch out for along the way.

2026.08.03 · 4 min read
How to Choose an Electronic Dictionary for Elementary Schoolers: Comparison Points and Our Family's Decision Family Life

How to Choose an Electronic Dictionary for Elementary Schoolers: Comparison Points and Our Family's Decision

When choosing an electronic dictionary as a study tool for your child, how should you weigh grade level, content volume, and price? Here's a rundown of the points we actually compared when picking a digital dictionary for elementary school.

2026.08.02 · 5 min read
Taking Stock of Disaster Supplies for Our 4 Kids Before Typhoon Season Family Life

Taking Stock of Disaster Supplies for Our 4 Kids Before Typhoon Season

After seeing a forecast of more typhoons than usual this summer, I took stock of our family's disaster supplies. Here's how I organized it, from the perspective of a household with several kids, including preparing our phone and communications setup.

2026.07.30 · 5 min read
3D Printing Projects with My Kids: What's Worked for Our Family 3D Printing & DIY

3D Printing Projects with My Kids: What's Worked for Our Family

Turns out my family owns a 3D printer. This time I want to share how I've turned that hobby into projects with my kids — from choosing the right design tool for the job, to the builds that were a hit, to using it for kanji learning. Here's a rundown of what's worked well for us.

2026.07.29 · 5 min read
Before Buying a 3D Printer, I Tried Outsourcing the Printing First 3D Printing & DIY

Before Buying a 3D Printer, I Tried Outsourcing the Printing First

I've actually gotten interested in 3D printing lately. Before buying a printer, I tried designing parts myself and outsourcing the actual printing. Here's that experience and a sense of the costs involved.

2026.07.28 · 5 min read
What I Learned Choosing 3D Printer Filament (PLA vs. PETG vs. TPU) 3D Printing & DIY

What I Learned Choosing 3D Printer Filament (PLA vs. PETG vs. TPU)

Since starting 3D printing with a Bambu Lab A1 mini, I've picked up real-world lessons on when to use PLA, PETG, or TPU, plus the 0.2mm nozzle and how to store filament properly.

2026.07.27 · 4 min read
What Is Gridfinity? Getting Started with 3D-Printed Desk Storage 3D Printing & DIY

What Is Gridfinity? Getting Started with 3D-Printed Desk Storage

A record of how I used Gridfinity, an open-source storage standard, together with my home 3D printer, the Bambu Lab A1 mini, to organize my desk drawer and my kids' study supplies. Here's a rundown of how the system works and how to get started.

2026.07.26 · 5 min read
How I Picked the Bambu Lab A1 mini: Process, Size, and Solo vs. Combo 3D Printing & DIY

How I Picked the Bambu Lab A1 mini: Process, Size, and Solo vs. Combo

I actually started a new hobby a while back: 3D printing. This first post covers how I decided on the Bambu Lab A1 mini — the process type, the size, solo unit or combo set, and even the timing of the purchase.

2026.07.23 · 4 min read
Why I Opened a Rakuten Bank Account in My Child's Name Family Life

Why I Opened a Rakuten Bank Account in My Child's Name

I opened a bank account in my child's name at Rakuten Bank. Here's what I learned about how few online banks actually offer minor accounts, and why keeping the money separate turned out to be worth it.

2026.06.26 · 3 min read
How 'Time-Blocking' Our Weeknights Finally Made Our Dual-Income Household Run Smoothly Family Life

How 'Time-Blocking' Our Weeknights Finally Made Our Dual-Income Household Run Smoothly

Weekday evenings had turned into a bit of a tightrope walk between housework and childcare, so I tried splitting the time into fixed blocks. Here's what I noticed after putting it into practice — the benefits and a few things to watch out for.

2026.06.12 · 4 min read
Switch to Rakuten Mobile, get up to 14,000 points Try the fee simulator and get 100 points, no sign-up required →
Apply Now →